CO2 Laser Marking Machine is specially developed for non-metals marking industry b. This machine was equipped with original Co2 generator and high-speed galvanometer,the speed is extremely fast and the precision is very high. The machine performance is steady and can continuously work more than 20 hours a day. The optical system is fully sealed, it can prevent the dust entering laser body and reduce the equipment failure rate.
Quantity: | |
---|---|
Features of CO2 Laser Marker with 80w Reci Glass Tube
1. It is of high performance, reliable, high conversion efficiency and low cost.
2. The performance of the equipment is extremely stable, the carving high precision and carving quickly for a long time of work.
3. The application of the air-cooled laser generator in China ensures the maximum purity of the gas, greatly extending its service life.
4. Adopting high speed galvanometer system with high speed, high precision and stable performance.
5. Adopting imported optical lens, low loss, excellent focusing performance.
6. Can quickly mark letter, number, graphic or automatic coding, serial number, lot number, bar code, 2D code, etc. on a non-metallic surface, which are precise, permanent, environmentally friendly and environmentally friendly.
Application of Separated Type CO2 Laser Marker with Metal Tube
It can be used in organic glass, ceramic, Synthetic materials, woods, bamboo, rubber, leather, paper, cloth and so on.It works in capacitance, inductance, Printed circuit board, integrated circuit, electric plug card, some kinds of instruments and control panels, buttons, cosmetic package, foods, drinks, handicraft and sationery.
Technical parameters
NO. | Description | Parameter |
1 | Marking area | 110*110mm/200*200mm/300*300mm |
2 | Laser power | 80W/100W |
3 | Marking speed | ≤8000mm/S |
4 | Max.Marking Depth | ≤0.1mm |
5 | Laser Wavelength | 1064μm |
6 | Marking lines | 1-10 marking lines(in the marking area) |
7 | Minimum line width | 0.01mm |
8 | Minimum character | 0.15mm |
9 | Resolution ratio | 0.01mm |
10 | Repeatability accuracy | ±0.002mm |
11 | Operating temperature | 5-40℃ |
12 | Unit Power | ≤500W |
13 | Graphic format supported | BMP,JGP,PNG,DXF, etc. |
14 | Supply Voltage | 220V/1P/50Hz(option:110V) |
Workshop
Exhibition
Certificate
Feedback from customer
content is empty!