Desktop CO2 Laser Marker with DAVI Laser Source

5 0 Reviews

CO2 Laser Marking Machine is specially developed for non-metals marking industry. This machine was equipped with original Co2 generator and high-speed galvanometer,the speed is extremely fast and the precision is very high. The machine performance is steady and can continuously work more than 20 hours a day. The optical system is fully sealed, it can prevent the dust entering laser body and reduce the equipment failure rate.

Quantity:


Inquire Add to Basket

Model: ER-30w
Brand: Eastrise

Product Description

Desktop CO2 Laser Marker with DAVI Laser Source

Features of Desktop CO2 Laser Marker with DAVI Laser Source

1. High performance, high reliability, high lightning conversion efficiency and low cost.

2. The performance of the equipment is extremely stable, the engraving precision is high, the engraving speed is fast, and it can work for a long time.

3. Using Chinese air-cooled laser generator to ensure the highest gas purity and basically extend the service life.

4. Adopt high speed, high precision and stable performance galvanometer system.

5. Imported optical lens, low loss, good focusing performance.

6. Letters, numbers, graphics or automatic codes, serial numbers, lot numbers, bar codes, QR codes, etc. can be marked on non-metallic surfaces quickly, accurately, permanently, pollution-free and with respect for the environment.

CO2 laser marker

Application of Desktop CO2 Laser Marker with DAVI Laser Source

It can be used in organic glass, ceramic, Synthetic materials, woods, bamboo, rubber, leather, paper, cloth and so on.It works in capacitance, inductance, Printed circuit board, integrated circuit, electric plug card, some kinds of instruments and control panels, buttons, cosmetic package, foods, drinks, handicraft and sationery.

CO2 laser marking machine

Technical parameters

NO.	Description	Parameter
1	Marking area	110110mm/200200mm/300*300mm
2	Laser power	10W/30W/60W100W
3	Marking speed	≤8000mm/S
4	Max.Marking Depth	≤0.1mm
5	Laser Wavelength	1064μm
6	Marking lines	1-10 marking lines(in the marking area)
7	Minimum line width	0.01mm
8	Minimum character	0.15mm
9	Resolution ratio	0.01mm
10	Repeatability accuracy	±0.002mm
11	Operating temperature	5-40℃
12	Unit Power	≤500W
13	Graphic format supported	BMP,JGP,PNG,DXF, etc.
14	Supply Voltage	220V/1P/50Hz(option:110V)