The Eastrise ER-515B is an automatic straight edge banding machine for furniture panels. Its processing stations combine gluing and pressing, end trimming, fine trimming, scraping and polishing to finish exposed panel edges.
It is intended for straight-edged workpieces rather than curved profiles. When selecting equipment, match the panel dimensions, edging material and adhesive to the proposed production task.
White cabinet components make edge quality easy to see. A small step between the face and edge band, glue residue or surface scratches can remain noticeable after assembly.
For inspection, compare the finished edge under consistent lighting and run a hand carefully along the cooled workpiece. Check that the edge band sits flush with the panel faces and that the corners have a clean finish.
Wood-grain panels benefit from an edge band that matches the face decoration in both color and texture. Check samples together before committing to a production batch; a similar color alone may not create a convincing match.
Approve a finished sample using the actual panel, edge band and adhesive before processing an order. Keep that sample available as the reference for later quality checks.
Finished shelves, side panels and partitions should fit together without edge damage. During handling, protect finished corners and avoid dragging panels across abrasive surfaces.
Inspect the assembled cabinet as well as individual panels. Assembly can reveal visible edge mismatches or alignment problems that are less obvious when components are checked separately.
| Parameter | Specification |
|---|---|
| Model | ER-515B |
| Edge band thickness | 0.4–3 mm |
| Edge band height | 13–60 mm |
| Workpiece thickness | 10–60 mm |
| Minimum workpiece width | 60 mm |
| Minimum workpiece length | 100 mm |
| Feed speed | 13–25 m/min |
| Air pressure | 0.6–0.7 MPa |
| Published total power range | 4–17 kW |
| Overall dimensions | 3600 × 1000 × 1600 mm |
These are the ranges published on the product page. Confirm the supplied configuration, installed power and material limits before ordering.
Prepare representative samples rather than testing only the easiest panel size. Include the smallest planned workpiece and the edging combinations used most often.
Check the adhesive bond after the recommended cooling or conditioning period. Record settings, material batches and inspection results so an accepted finish can be reproduced. Follow the adhesive supplier’s instructions and the machine operating manual.
This model is described as a straight edge bander. Curved workpieces require a suitable alternative process.
Share panel dimensions, edge band type and thickness, expected daily output, available electrical supply and compressed air conditions. Include sample photos where appearance is critical.
Evaluate the finished edge, handling time and consistency across representative samples. The fastest setting is useful only when the required finish is maintained.
Home About Us Products Applications Video Download FAQ News Contact Us